The Dust-Buster® family of efficient, environmentally friendly foaming chemicals can solve your most difficult dust problems in almost every industry!
Dust-Buster® Foam Agents are unique because the highly efficient foam is injected directly into the impact areas of crushers, screens and transfer points. The foam then smothers, captures and collects airborne dust. The result is extremely effective dust emission control.
- CDS 10 DUST SUPPRESSANT
- This specially formulated surfactant is for use in water spray dust suppressant systems, greatly increasing the efficiency of particulate capture.
- This specially formulated surfactant is for use in water spray dust suppressant systems, greatly increasing the efficiency of particulate capture.
- CDS 80 FOAM DUST SUPPRESSANT
- This foam product is specifically formulated for use at crushers, transfer points, stackout areas and reclaim areas.
- This foam product is specifically formulated for use at crushers, transfer points, stackout areas and reclaim areas.
- CDS 8040 FOAM DUST SUPPRESSANT
- CDS 8040 is also specifically formulated for use at crushers, transfer points, stackout areas and reclaim areas.
- CDS 8040 is also specifically formulated for use at crushers, transfer points, stackout areas and reclaim areas.
- RDC 8020 RESIDUAL DUST SUPPRESSANT
- A foam dust suppressant designed for use in material handling and processing systems at mines, aggregate plants, utilities and coke plants. Unlike conventional dust suppressants, which control dust at a point source, RDC 8020 possesses a residual effect. It not only reduces dusting at point of application, but throughout downstream operations as well.
- A foam dust suppressant designed for use in material handling and processing systems at mines, aggregate plants, utilities and coke plants. Unlike conventional dust suppressants, which control dust at a point source, RDC 8020 possesses a residual effect. It not only reduces dusting at point of application, but throughout downstream operations as well.
- RDC 8051-C RESIDUAL DUST SUPPRESSANT
- A dust suppressant designed for use in material handling and processing systems at coal mines, coal-fired utilities and coke plants.
- A dust suppressant designed for use in material handling and processing systems at coal mines, coal-fired utilities and coke plants.
- SDC-7000 DUST SUPPRESSANT AND FOAMING AGENT
- A multi-component dust control and foaming agent. SDC-7000 is injected into wet suppression systems to enhance water effectiveness and minimize the effect of hard water. It is utilized in foam suppression systems to eliminiate dust, by generating a blanket of foam trapping emissions at the source. And it is used in water trucks as a dust suppression additive to extend effectiveness for water used for road wetting.
- A multi-component dust control and foaming agent. SDC-7000 is injected into wet suppression systems to enhance water effectiveness and minimize the effect of hard water. It is utilized in foam suppression systems to eliminiate dust, by generating a blanket of foam trapping emissions at the source. And it is used in water trucks as a dust suppression additive to extend effectiveness for water used for road wetting.
- SDC-12000 FOAMING SUPPRESSANT FOR SHREDDERS
- Dust-Buster® SDC-12000 is a foam generating product specifically formulated for use in automobile shredders and similar process systems. It minimizes and controls blue smoke dust and explosions.
Midwest is a full service spraying system company from site survey, equipment design, installation and service through on-site performance testing. Our personnel assure all systems are functioning properly and efficiently and optimum dust is maintained.
|
One of your most important business assets |
 |
To learn more about Dust-Buster® Spray Systems, CLICK HERE